4-20 ma Control Loop Isolator, Surge Suppressor and EMI\RFI filter

4-20 ma Control Loop Isolator, Surge Suppressor and EMI\RFI filter
Product Code: IP-420-D
Availability: In Stock
$280.00 Ex Tax: $280.00
Qty: Add to Cart

This is a multi-function product that provides current loop isolation ,surge
suppression and effective EMI/RFI noise filtering for 4-20 ma

control loop applications. An advanced design 10-35 VDC loop powered 4-20 madc isolator
designed around galvanometric-based technology provides 1500 VRMS of
instantaneous isolation. Accuracy to within ± 0.1%, Linearity
better than 0.01%. Adds 15 ohms ± 10% to the control loop.

The surge suppression portions of the
circuit are designed to protect sensitive process control equipment
and instrumentation from proximity lightning strikes and other transient
sources. The multi-stage design utilizes gas ionization-based technology
as primary stage of protection. The secondary stage incorporates
a high-speed transient voltage suppression (TVS) circuit. 

EMI/RFI noise filtering is accomplished via a broadband passive noise filter.
The proprietary common mode filter circuit provides effective
elimination of undesirable noise and EMI/RFI from 0.1 Hz to 50 Mhz.

Isolation Type: Galvanometric based
Isolation: Instantaneous, 1500 VRMS
Power: 10-35 VDC
Accuracy: ± 0.1%
Linearity: ± 0.01%
Repeatability: ± 0.02%
Impedance: + 15 ohms ± 10.0%
Operating Temp.: -40°F (-40°C) to 194°F (90°C)
Operating Humidity: 0-99% (non-condensing)

Type: Multistage
Primary Stage: Gas ionization, crowbar action
Maximum Current: 20,000 amps\460 joules
Response Time: 1μs\100 volt rise
Surge Life min.: 400 shots at max. current
Secondary Stage: Transient Voltage Suppressor
TVS bidirectional
Maximum Current: 70 amps
Response Time: <1ns
Clamping Voltage: 36 volts
Surge Life: Unlimited

Type: Passive, broadband,
common mode
Range: 0.1Hz to 50 MHz

There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: