4-20 ma Isolator and EMI\RFI filter

4-20 ma Isolator and EMI\RFI filter
Product Code: IP-230-D
Availability: In Stock
$210.00 Ex Tax: $210.00
Qty: Add to Cart

A combination package, which is designed to provide 10-35 VDC
loop powered 4-20 madc isolation, as well as surge suppression in a
single package. Current loop isolation is provided by galvanometricbased
technology. The isolator provides 1500 VRMS of instantaneous
isolation. Accuracy of ±0.1%, with linearity better than 0.1%.
Adds 15 ohms ± 10% to the control loop. The surge suppression
portions of the circuit is designed to protect sensitive process
control equipment and instrumentation from proximity lightning
strikes and other surge sources. The multi-stage design utilizes
gas ionization-based technology as a primary protection stage.
A secondary stage incorporates a high-speed transient voltage
suppression (TVS) circuit. The final stage employs ultra-fast
thermal-based circuit breakers with an auto-reset capability. This
final stage, not only supports the primary and secondary stages
of protection, but will also provide equipment protection from
mis-wiring or equipment failure that may introduce high voltage onto the control loop.

Isolation Type: Galvanometric based
Isolation: Instantaneous, 1500 VRMS
Power: 10-35 VDC
Accuracy: ± 0.1%
Linearity: ± 0.01%
Repeatability: ± 0.02%
Impedance: + 15 ohms ± 10.0%
Operating Temp.: -40°F (-40°C) to 194°F (90°C)
Operating Humidity: 0-99% (non-condensing)

Type: Multistage
Primary Stage: Gas ionization, crowbar action
Maximum Current: 20,000 amps\460 joules
Response Time: 1μs\100 volt rise
Surge Life min.: 400 shots at max. current
Secondary Stage: Transient Voltage Suppressor
TVS bidirectional
Maximum Current: 70 amps
Response Time: <1ns
Clamping Voltage: 36 volts
Surge Life: Unlimited

There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: